The stage at which construction identifiable with a specific ship begins

The stage at which assembly of the ship has commenced comprising at least 50 tonnes or one per cent of the estimated mass of all structural material, whichever is less

default

What is the definition of a similar stage of construction?

It is exempt from any specific requirements of the chapter

What happens if a cargo ship is converted to a passenger ship?

Compliance with the requirements of chapter II-1 of the International Convention for the Safety of Life at Sea, 1974

Compliance with the requirements of chapter II-2 of the International Convention for the Safety of Life at Sea, 1974

Compliance with the requirements of chapter III-1 of the International Convention for the Safety of Life at Sea, 1974

For ships constructed before 1 July 1986, what must the Administration ensure?

The requirements previously applicable to these ships

The requirements for new ships constructed on or after 1 July 1986

What requirements must ships undergoing repairs, alterations, modifications, and outfitting continue to comply with?

Ships that do not proceed more than 20 miles from the nearest land

Ships entitled to fly the flag of a specific State

Which ships may be exempted from specific requirements of the chapter?

Rules annexed to the Special Trade Passenger Ships Agreement, 1971

Rules annexed to the Protocol on Space Requirements for Special Trade Passenger Ships, 1973

What conditions must passenger ships employed in special trades comply with?

The distance between perpendiculars taken at the extremities of the deepest subdivision load line

The distance between the bow and the stern of the ship

The longest distance measured between frame to frame

What is the definition of the length of a ship?

The vertical distance from the molded base line amidships to the subdivision load line

The extreme width from outside of frame to outside of frame at or below the deepest subdivision load line

What is the definition of the breadth of a ship?

The vertical distance from the molded base line amidships to the subdivision load line in question

What is the definition of the draught of a ship?

The percentage of that space which can be occupied by water

The volume of a space which extends above the margin line

The height of the space above the bulkhead deck

What is the definition of permeability of a space?

Spaces provided below the margin line for the accommodation and use of passengers

Spaces provided for the accommodation and use of crew

Spaces provided for the storage of provisions and mail

What is the definition of passenger spaces?

A tanker defined in regulation 1 of Annex I of the Protocol of 1978 relating to the International Convention for the Prevention of Pollution from Ships, 1973

A tanker for transporting hazardous materials

A passenger ship with special category spaces

What is the definition of a ro-ro passenger ship?

The equipment by which orders are transmitted from the navigation bridge to the steering gear power units

The equipment used for controlling the steering gear of a ship

The machinery and equipment necessary for turning the rudder

What is the definition of a steering gear control system?

The machinery used for controlling the steering gear of a ship

The equipment necessary for turning the rudder

The machinery, rudder actuators, and steering gear power units necessary for steering the ship

What is the definition of main steering gear?

The equipment necessary to turn the rudder in case of failure of the main steering gear

The machinery used for controlling the auxiliary steering gear of a ship

The machinery, rudder actuators, and steering gear power units necessary for turning the rudder

What is the definition of auxiliary steering gear?

A condition under which the ship is able to navigate safely

A condition under which all systems and facilities on the ship are working properly

A condition under which the ship is able to provide comfortable conditions for the crew

What is the definition of normal operational and habitable condition?

A condition under which the ship is unable to navigate safely

A condition under which essential services on the ship are not working

A condition under which emergency procedures are in effect

What is the definition of emergency condition?

A condition under which the ship is unable to move

A condition under which the main propulsion plant and auxiliaries are not in operation

A condition under which the ship has lost electrical power

What is the definition of dead ship condition?

The space in which the main source of electrical power is situated

The space where electrical energy is distributed to the ship's services

What is the definition of main generating station?

A switchboard supplied by the main source of electrical power

A switchboard used for distributing electrical energy to the ship's services

A switchboard used for emergency electrical power

What is the definition of main switchboard?

Spaces containing propelling machinery and boilers

Spaces containing refrigerating and air conditioning machinery

Spaces containing generators and major electrical machinery

Spaces where fire control equipment is centralized

Spaces where the ship's radio or main navigating equipment is located

Spaces where the emergency source of power is located

A cargo ship used for the carriage of dangerous chemicals

A cargo ship used for the carriage of bulk liquid products

A cargo ship used for the carriage of liquefied gases

The difference in tonnes between the displacement of a ship and its lightweight

The difference in tonnes between the displacement of a ship and its cargo

The difference in tonnes between the displacement of a ship and its fuel

The displacement of a ship without cargo, fuel, and passengers

The displacement of a ship without cargo, fuel, and ballast water

The displacement of a ship without cargo, fuel, and crew

Compliance with a recognized classifcation society or applicable national standards

Compliance with the provisions of regulation XI/1

Compliance with the structural, mechanical, and electrical requirements of a classification society

What are the requirements for ships' structure, mechanical, and electrical systems?

The tanks should be painted with hard protective coatings

The tanks should have an efficient corrosion prevention system

What is the requirement for seawater ballast tanks on oil tankers and bulk carriers?

Tankers should have means of access to the bow even in severe weather conditions

Means of access should be provided at the first scheduled dry-docking after 1 July 1998

Means of access should be approved by the Administration based on guidelines developed by the Organization

What is the requirement for safe access to tanker bows?

Experience Full Quiz Functionality